Maintenance - Sharp MX-C250F Technical Handy Manual

MAINTENANCE

Maintenance Indications:
Black Drum (Counter) has reached
DK
Cyan Drum (Counter) has reached
DC
Magenta Drum (Counter) has reached
DM
Yellow Drum (Counter) has reached
DY
Black Developer (Counter) has reached
VK
Cyan Developer (Counter) has reached
VC
Magenta Developer (Counter) has reached
VM
Yellow Developer (Counter) has reached
VY
Fusing Unit Counter has reached the
FK
Primary Transfer Unit Counter has reached
TK
TA
CA
AA
Starting Powder:
The following starting powder should already be applied to the relevant consumable unit for
maintenance:-
Starting Powder
MX-C250F
MX-C300W
MX-C301W
Note: The Yellow Toner used for Start Powder (Primary Transfer Belt only) is the same as MX-31GTYA.
CAUTION:
Do not apply Stearic Acid (UKOG-0312FCZZ), Strontium Titanium (UKOG-0316FCZZ) or Titanium
Hydroxide (UKOG-0322FCZZ) starting powder to the Primary Transfer Belt.
14
the specified life.
the specified life.
the specified life.
the specified life.
the specified life.
the specified life.
the specified life.
the specified life.
specified limit.
the specified limit.
Maintenance [All] Counter has reached specified limit
Maintenance [Colour] Counter has reached specified limit
Maintenance [All] & [Colour] Counters have reached the specified limits
Replace Black Drum
Replace Cyan Drum
Replace Magenta Drum.
Replace Yellow Drum.
Replace Black Developer.
Replace Colour
Replace the Fusing Unit
Replace Primary Transfer
Belt and Blade kits.
OPC Drum
UKOG-0312FCZZ
[Stearic Acid]
Developer Kit.
Primary Transfer Belt
CKOG-0345DS51
[Yellow Toner]
SHARP
Process
Section
(Drum)
Process
Section
(Developer)
Fuser
Section
Transfer
Section