Supplies; Inner Finisher Maintenance - Sharp MX-M6570 User Manual

Digital multifunctional system

Hide thumbs Also See for MX-M6570:

Table of Contents

BEFORE USING THE MACHINE►PERIPHERAL DEVICES

SUPPLIES

The finisher requires the following staple cartridge:

Staple cartridge (approx. 5000 staples per cartridge x three cartridges)

When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation

procedure to replace the staple cartridge.

Replacement the staple cartridge

Open the finisher front cover.

While pressing the lever over to the

left, slide the finisher to the left until it

Gently slide the finisher until it stops.

Lower the staple case release lever

and remove the staple case.

Pull the staple case out to the right.

Table of Contents