Section 11: Addressable Manual Pull Station
11.1 Description
The BG-12LX is an addressable manual pull station with a key-lock reset feature.
NOTE: For more information refer to the Installation Instructions provided with this device.
11.2 Installation
11.2.1 Setting an SLC address
Each unit is factory preset with an address of "00." To set an SLC address refer to "Setting an SLC
address for a Single Point Module" on page 34.
11.2.2 Wiring a Manual Pull Station
Figure 11.1 shows typical wiring for a BG-12LX Manual Pull Station to an SLC:
FireLite SLC Wiring Manual — P/N 51309:P4 9/17/2014
+
SLC
–
Figure 11.1 Wiring of a BG-12LX Pull Station to an SLC
–
To next device
on SLC
+
67