Hitachi IJ UX Instruction Manual page 95

(2) Set the coordinate of one print item
● Set and change the "horizontal (X) coordinate" and "vertical (Y) coordinate" of the print item to be
edited, at the bottom-left.
● Press Individual item move, and set the coordinate of the print item to be edited.
● There are 3 methods of setting the horizontal (X) coordinate and vertical (Y) coordinate.
● The horizontal (X) coordinate and vertical (Y) coordinate cannot be set over the range of [ Table of
(1) ].
Methods of setting the horizontal (X) coordinate and vertical (Y) coordinate
Directly touching the screen
Set the value of the coordinate
Set the position by cursor button
The horizontal (X)
coordinate and
vertical (Y) coordinate
of editing objective can
be moved by directly
touching the screen.
Press the OK if the print item
has been moved.
Type
The print item to be edited can be moved by directly touching the
screen within the limit of vertical dots.
The print item to be edited can be moved by setting the value of
the "horizontal (X) coordinate" and "vertical (Y) coordinate" on
the screen.
The print item to be edited can be moved dot by dot one by means
of ↑ ↓ ← → buttons.
Print format
Message name[ ]
《
−
abcde
fghij
klmno
Prev.item
00000
Item position select
1
Bold (times 1∼9)
Item move with button or touch on screen.
Bar code none
Horizontal (X)
Vertical (Y)
Inter-char. space
(MAX 0)
OK
12x16
Dot matrix
Overall
Individual
item move item move
Individual item move
The editing objective can be moved by
directly touching the screen.
[Stop ]
Com=0
Makeup
》
＋
abcde
fghij
klmno
Next item
00100
↑
00001
00
← →
1
↓
Cancel
Delete item Insert item
Press the Cancel if canceling the
moving the coord..
●Set the print format (Free layout; UX-D,E only) 4-32
Features
2015.07.07 12:45
Ink
Startup
Manual
Apply
HOME
Item 1
Usage range
Hor. 60
Vert. 16
Edit message
Print spec.
Adjustment
char. cond.
Back
Cursor button