Hitachi IJ UX Instruction Manual page 5

SAFETY PRECAUTIONS
Installation Environment of Printer
● Ensure that there is no flame- or arc-generating device around the
printer.
The ink and makeup are both flammable and may cause fire.
Fire can be generated by matches, lighters, cigarettes, heaters, stoves, gas
burners, welders, grinders and static electricity. Arcs may be generated from
open-type relays, switches, and brush motors. Before handling the ink and
makeup, remove static electricity from your body, peripheral equipment, and so
on. In the interest of safety, position a dry-chemical fire extinguisher near the
printer.
● Since the ink and makeup contain organic solvents, install the printer at
an adequately ventilated location.
1
Never install the printer in an enclosed space.
2
Connect exhaust equipment to the printer in order to prevent it from filling
with organic solvent vapor.
Secure adequate space for the ink/makeup handling area and printer
3
installation site. At least 200 m must be provided per print head.
Ensure that adequate ventilation is provided.
● If extraneous noise enters the printer, it may malfunction or break down.
For maximum noise immunity, observe the following installation and wiring
precautions.
1
Ensure that 100 to 120 VAC or 200 to 240 VAC power cables are not
bundled with other power supply cables.
2 Insulate the printer main body and print head so that they do not come into
direct contact with the conveyor or other devices.
3
If the employed print target detector is housed in a metal case, use a plastic
mounting brace for the purpose of insulating the detector from the conveyor
and other devices.
4 Be sure that the print target detector wiring is not bundled together with other
power supply cables.
WARNING
CAUTION
(Continued)
●Safety Precautions (3)