E1 / E2: Ethernet port configuration
The rotary switches are situated on the front panel of the MotiFlex e180. The rotary
switches are read once at startup. They select the mode of operation for the Ethernet
fieldbus connectors E1 and E2 on the top panel of the drive.
Set both front panel rotary HI / LO switches to 0 to select EtherCAT slave mode.
Value
HI
00
01-EF
F0
F1
LO
F2-FF
See
MotiFlex e180 indicators
indicators.
Mode
EtherCAT slave mode
Ethernet POWERLINK CN mode: selected value is node ID
Reserved
Reserved
Reserved
on page
35
for a description of the fieldbus status
Physical connection 19