Installing the Cisco ASR 903 Router
This chapter describes how to install the Cisco ASR 903 Router.
•
•
•
•
•
•
•
•
Prerequisites
Before installing the Cisco ASR 903 Router, it is important to prepare for the installation by:
• Preparing the site (site planning) and reviewing the installation plans or method of procedures (MOP)
• Unpacking and inspecting the Cisco ASR 903 Router
• Gathering the tools and test equipment required to properly install the Cisco ASR 903 Router
For more instructions on how to prepare for the installation of the Cisco ASR 903 Router, see
Installation, on page
Installing the Router in a Rack
The following sections describe how to install the Cisco ASR 903 Router in a rack:
Prerequisites, page 79
Installing the Router in a Rack, page 79
Installing the Chassis Ground Connection, page 87
Installing the Fan Tray, page 90
RSP Installation, page 93
Interface Module Installation, page 96
Installing the Power Supply, page 101
Connecting the Cisco ASR 903 Router to the Network, page 117
53.
C H A P T E R
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
3
Preparing for
79