Connecting To The Auxiliary Port - Cisco ASR 903 Hardware Installation Manual

Installing the Cisco ASR 903 Router
Note If a User Account Control warning appears, click "Allow - I trust this program..." to proceed.
Step 5 When the InstallShield Wizard Completed window appears click Finish.

Connecting to the Auxiliary Port

When a modem is connected to the auxiliary port, a remote user can dial in to the router and configure it. Use
a light blue console cable and the DB-9-to-DB-25 connector adapter.
Note The console cable and DB-9-to-DB-25 connector are not included with the Cisco ASR 903 Router; they
are ordered separately.
To connect a modem to the router, follow these steps:
Step 1 Connect the RJ45 end of the adapter cable to the black AUX port on the router, as shown in the figure below .
Figure 73: Connecting a Modem to the Cisco ASR 903 Router
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
Connecting to the Auxiliary Port
123