2-Port 40 Gigabit Ethernet Qsfp Interface Module (2X40Ge) - Cisco ASR 903 Hardware Installation Manual

Cisco ASR 903 Router Overview
Interface Modules

2-port 40 Gigabit Ethernet QSFP Interface Module (2x40GE)

The dual port 40 Gigabit Ethernet interface module supports the 40 Gigabit Ethernet port. The 40GE interface
is supported using QSFP+ optics. The figure below shows the interface module.
Figure 21: 2-port 40 Gigabit Ethernet Interface Module
For information on supported SFP modules, see Cisco ASR 900 Series Aggregation Services Routers Data
Sheet.
For more information about installing a 2x40GE module, see the Interface Module Installation.
Cisco ASR 903 Aggregation Services Router Hardware Installation Guide
32