Table of Contents
Advertisement
6.
Select the By bridge group radio button.
7.
Select a Wired Ports check box or a Wireless check box:
•
If your device is connected to an Ethernet port on the modem router, select the Wired Ports check
box that corresponds to the Ethernet port on the modem router to which the device is connected.
•
If your device is connected to your modem router's WiFi network, select the Wireless check box that
corresponds to the modem router's WiFi network to which the device is connected.
Note
You must select at least one Wired Ports or Wireless check box. You can select more
than one check box.
8.
Click the Apply button.
Your settings are saved.
Nighthawk AC1900 WiFi LTE Modem Router
Network Settings
81
Advertisement
Table of Contents
