Table of Contents
Advertisement
Figure 3. Rear panel
Viewed from left to right, the back panel contains the following components:
•
LED On/Off button. If this button is pressed, all the modem router's LEDs are turned off except the
Power LED.
•
SIM slot. Insert a micro-SIM card into this slot.
•
Reset button. Pressing the Reset button returns the modem router to its factory settings. For information
about the factory settings, see
•
Ethernet ports. ports. Four Gigabit Ethernet RJ-45 LAN ports to connect the modem router to LAN
devices.
•
Internet port. One Gigabit Ethernet RJ-45 WAN port to connect the modem router to a cable modem.
•
USB port. One USB 2.0 port to connect a storage device.
•
Power On/Off button. Press the Power On/Off button to provide power to the modem router.
•
DC power connector. Connect the power adapter that came in the product package to the DC power
connector.
Nighthawk AC1900 WiFi LTE Modem Router
Factory Settings
Hardware Setup
on page 176.
12
Advertisement
Table of Contents
