Factory Settings - NETGEAR R7100LG User Manual

Factory Settings

You can return the modem router to its factory settings. Use the end of a paper clip or a similar object to
press and hold the Reset button on the back of the router for at least seven seconds. The modem router
resets and returns to the factory configuration settings shown in the following table.
Table 3. Factory default settings
Feature
Router login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP range
Time zone
DHCP starting IP address
DHCP ending IP address
DMZ
Time adjusted for daylight saving
time
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Nighthawk AC1900 WiFi LTE Modem Router
Default Setting
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
(GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon,
London
192.168.1.2
192.168.1.254
Disabled
Disabled
All disabled
All enabled
Supplemental Information
176