Table of Contents
Advertisement
With a 6rd tunnel configuration, the modem router follows the RFC5969 standard, supporting two ways to
establish a 6rd tunnel IPv6 WAN connection:
•
Auto Detect mode. In IPv6 Auto Detect mode, when the modem router receives option 212 from the
DHCPv4 option, autodetect selects the IPv6 as 6rd tunnel setting. The modem router uses the 6rd option
information to establish the 6rd connection.
•
Manual mode. Select 6rd Tunnel. If the modem router receives option 212, the fields are automatically
completed. Otherwise, you must enter the 6rd settings.
To set up an IPv6 6rd Internet connection:
1.
Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > IPv6.
The Basic Settings page displays.
5.
From the Internet Connection Type menu, select 6rd Tunnel.
The page adjusts. The modem router automactially detects the information in the following sections:
•
6rd (IPv6 Rapid Development) Configuration. The modem router detects the service provider's
IPv4 network and attempts to establish an IPv6 6rd tunnel connection. If the IPv4 network returns
6rd parameters to the router, the page adjusts to display the correct settings in this section.
•
Router's IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the modem
router's LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated
by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.
Nighthawk AC1900 WiFi LTE Modem Router
Specify Your Internet Settings
37
Advertisement
Table of Contents
