Table of Contents
Advertisement
4.
Select Internet.
5.
For the Does your Internet connection require a login? setting, select the Yes radio button.
6.
From the Internet Service Provider menu, select the encapsulation method: PPPoE, L2TP, or PPTP.
7.
In the Login field, enter the login name that your ISP gave you.
This login name is often an email address.
8.
In the Password field, type the password that you use to log in to your Internet service.
9.
If your ISP requires a service name, type it in the Service Name (if Required) field.
10.
From the Connection Mode menu, select Always On, Dial on Demand, or Manually Connect.
11.
To change the number of minutes until the Internet login times out, in the Idle Timeout (In minutes)
field, type the number of minutes.
This is how long the modem router keeps the Internet connection active when no one on the network
is using the Internet connection. A value of 0 (zero) means never log out.
12.
Select an Internet IP Address radio button:
•
Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP automatically
assigns these addresses.
•
Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP address that
your ISP assigned. The gateway is the ISP modem router to which your modem router connects.
13.
Select a Domain Name Server (DNS) Address radio button:
•
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP
automatically assigns this address.
•
Use These DNS Servers. If you know that your ISP requires specific servers, select this option.
Enter the IP address of your ISP's primary DNS server. If a secondary DNS server address is
available, enter it also.
Nighthawk AC1900 WiFi LTE Modem Router
Specify Your Internet Settings
29
Advertisement
Table of Contents
