Tailstock Controls; Tailstock - Grizzly G9729 Instruction Manual

Tailstock Controls

Figure 20 shows the locations of the tailstock
controls.
1. Tailstock Handwheel
Turning the handwheel advances or retracts the
quill in the tailstock. The graduated dial on the
handwheel is adjustable.
2. Quill Lock Lever
This lever locks the tailstock quill in place.
3. Tailstock Lock Lever
This lever locks the tailstock in place on the lathe
bed.
4. Offset Mechanism
Loosening these bolts allows the tailstock to be
offset from center by turning a screw. This fea-
ture will allow taper turning when a workpiece is
held between centers.
Figure 20. Detail of tailstock controls.
-27-
G9729 Combination Lathe/Mill