GE RPV311 Technical Manual page 174

Chapter 12 – RPV Tools
1.3.7 Editing a Stored Configuration
1.3.8 Deleting a Locally Stored Configuration
1.3.9 Creating a Configuration Report
RPV311-TM-EN-7
Double click Conftool icon. The Configuration Tool interface will open in the default
Web browser;
Click on the <I > button. A new window will open;
MPORT
Click on the Browse button to choose the configuration file previously saved on the
computer;
Enter a name for the configuration;
Click on the <OK> button. An RPV configuration interface will open. It is possible to
check the configuration parameters as if user were on-line with the equipment;
Click on the <S > button once again to save the new configuration on the PC;
AVE
Click on the <F > button to go back to the main screen of the Configuration Tool.
INISH
The configuration will be on the list of locally stored configurations.
The configuration window will appear in the Configuration Tool. The user can choose
to edit the configuration again, store it or transmit it to the RPV.
It is possible to save the configuration with the same name as an existing one.
However, the existing configuration will be overwritten.
To edit a stored configuration follow these steps.
Select the name of the stored configuration to be edited and click on the <E
button;
Change the configuration parameters and click on the <S
A new window will open requiring the name of the configuration (maximum of 22
characters including _, -, 0-9, a-z and A-Z);
Click on the <S > button once again to save it on the PC;
AVE
Click on the <F > button to go back to the main screen of the Configuration Tool.
INISH
To remove a configuration that is locally stored, follow these steps:
Select the name of the stored configuration to be deleted and click on the <R
button;
The message Remove this item will be shown. Click on the <Y
the configuration.
To create the configuration report, follow these steps:
Select the name of the stored configuration to be deleted and click on the <R
button;
An HTML Web page will open with a list of all configuration parameters.
The report consists of a header with the following information: owner, identifier, and
location of the equipment, revision number, date and time of the last configuration
change.
To print this report, click on the <P
AVE
> button.
RINT
RPV311
>
DIT
> button;
>
EMOVE
> button to remove
ES
>
EPORT
174