GE RPV311 Technical Manual page 172

Chapter 12 – RPV Tools
1.3.2 Plug-in
RPV311-TM-EN-7
B List of equipment configurations stored locally:
Name
Location
Identification
Equipment
C Buttons to send or receive a configuration to or of a piece of equipment, to import
or export a configuration to or of a file, to edit or remove an equipment configuration
which is locally stored, and to convert an older version configuration for a newer
version (the Convert button is applicable only for the model RPV-310).
Before using the Configuration Tool it may be necessary to install a plug-in file
related to the firmware version installed on the equipment.
Every equipment model and firmware upgrade has a new plug-in file to incorporate
the changes to the Configuration Tool.
The plug-in file is available with the firmware release.
Installation of the plug-in file is mandatory for any equipment model and firmware
version that is to use this tool.
To install the plug-in, do the following:
1. Double click on the plug-in file (example: rpv310-software.plugin. install-en-21A00).
2. Select the checkbox with the text to Accept the agreement license terms and click
on the <Install>button. Wait for installation to be completed and then click on the
<Finish> button.
See C:\RPV\conftool\resourses\plugins to check which plug-ins are installed.
To remove a plug-in, go to Start > Control Panel > Add or remove programs.
Select the plug-in file to be removed and click on the <Remove> button.
The uninstall process takes about 1 minute.
Equipment configurations
Configuration name defined by the user
Shows location of the equipment.
The location of the equipment is defined in the
RPV configuration. This information is read of
the E
QUIPMENT
Shows the identification of the equipment.
The identification of the equipment is defined in
the RPV configuration. This information is read
of the E
QUIPMENT
Shows the equipment model and firmware
version to which the configuration refers
> C
ONFIGURATION FILE
> I
DENTIFICATION
RPV311
172