Epson TM-T88V Technical Reference Manual page 66

Selecting interface mode
Selectable from: automatic selection, fixed to UB interface, or fixed to built-in USB. Those 3
modes are described in both tables below.
The TM-T88V has dual interfaces: a built-in USB interface and another interface selected
by the customer. (The selectable interface is referred to as the "UB" interface.) The table
below describes the modes you can set for the printer to control the dual interfaces.
For models with serial/parallel UB
Interface mode
Automatic selection (default setting)
Fixed to UB
Fixed to built-in USB
For models with other UB
Interface mode
Automatic selection (default setting)
Fixed to UB
Fixed to built-in USB
Automatic selection:
The interface of either the UB or built-in USB to which data is transmitted first is selected.
Once the interface is selected, the selection is enabled until the power is turned off or the
printer is reset.
Setting the number of head energizing parts
• One-part energizing (default setting)
• Two-part energizing
• Four-part energizing
• Usually, the number of head energizing parts does not need to be changed.
• The maximum print speed (300 mm/s) can be performed only when one-part energizing
66
is selected.
UB Built-in USB
Available Available
Available Not available
Not available Available
UB Built-in USB
Available Not available
Available Not available
Not available Available