Functions - Epson TM-T88V Technical Reference Manual

• To directly configure the printer in the memory switch setting mode, see
• For detailed information about the TM-T88V Utility, see the TM-T88V Utility User's
• For detailed information about ESC/POS commands, see the ESC/POS Application

Functions

Setting the paper width
• 80 mm (default setting)
• 58 mm
• Be sure to install the roll paper guide when you select the 58 mm paper width. (See
• Once you change the paper width from 80 mm to 58 mm, you cannot change it back to
Setting the print density
Selectable from levels 1 to 13 (70% ∼ 130%)
The print density can be set with DIP switches (2-3/2-4) or the customized value. (See
"Selecting the Print Density (DIP Switches 2-3/2-4)" on page
customized value is "Depends on the DIP switch settings." If the customized value is
changed, the value set with the customized value is enabled.
Setting the multi-tone print density
Selectable from levels 1 to 13 (70% ∼ 130%)
• First change the print density, and then configure the Multi-tone print density.
• If you set the density too high, the contrast becomes lower. Select the density level
64
Setting Mode" on page 71.
Manual.
Programming Guide.
"Changing the Paper Width" on page
80 mm.
checking the overall tone balance of your image.
27.)
62.) The default setting of the
"Memory Switch