For Usb Interface - Epson TM-T88V Technical Reference Manual

For USB Interface

If you want to communicate via the built-in USB interface when you use a model with an
interface other than the serial/parallel interface, you need to change the interface mode
with the memory switch (customized value). To set the memory switch (customized value),
see "Setting the Memory Switches (Customized Value)" on page
Connecting the built-in USB interface cable
1
Put the USB cable on the hook as shown in the figure, then connect it
firmly to the built-in USB interface connector.
2
Connect the other connector of the cable to the host computer.
Built-in USB interface connector
USB cable
Hook
Chapter 2 Setup
63.
35
2