Specifications - Makita 2712 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Blade body thickness
Max. cutting capacities
Table size (L x W)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear safety glasses.
･
Do not place hand or fingers close to
the blade.
･
Only for EU countries
Do not dispose of electric equipment
together
material!
In observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for cutting in wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. This
tool should be grounded while in use to protect the
operator from electric shock. Use only three-wire
extension cords which have three-prong grounding-type
plugs and three-pole receptacles which accept the tool's
plug.
Model
Arbor hole
Blade diameter
Thickness at 90°
Thickness at 45°
Width
No load speed
Net weight
Safety class
with household
of the
on Waste Electric
Equipment
environmentally
2,950 (min
END310-1
SAFETY INSTRUCTIONS
WARNING! When using electric tools, basic safety
precautions, including the following, should always
be followed to reduce the risk of fire, electric shock
and personal injury. Read all these instructions
before operating this product and save these
instructions.
For safe operations:
1. Keep work area clean.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
waste
Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
European
area well lit. Do not use power tools where there
and
is risk to cause fire or explosion.
and its
3. Guard against electric shock.
Avoid body contact with earthed or grounded
surfaces (e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away.
Do not let visitors touch the tool or extension cord.
compatible
All visitors should be kept away from work area.
5. Store idle tools.
ENE003-1
When not in use, tools should be stored in a dry,
high or locked up place, out of reach of children.
6. Do not force the tool.
ENF001-1
It will do the job better and safer at the rate for
which it was intended.
7. Use the right tool.
Do not force small tools or attachments to do the
job of a heavy duty tool. Do not use tools for
purposes not intended; for example, do not use
circular saws to cut tree limbs or logs.
2
2712
30 mm
315 mm
2 mm or less
85 mm
58 mm
1,600 mm
-1
) (50 Hz)
550 mm x 1,600 mm with sub table (back)
52.9 kg
Class I
-1
3,400 (min ) (60 Hz)
ENA001-2