Connecting The Power Cord - Pioneer AVH-X8790BT Owner's Manual

Connecting the power cord

Yellow
To terminal supplied with power regardless of ignition
switch position.
Red
To electric terminal controlled by ignition switch (12 V DC)
ON/OFF.
Orange/white
To lighting switch terminal.
Black (earth)
To vehicle (metal) body.
White
Front speaker
White/black
Left
Green
Rear speaker
Green/black
Note
Make sure to connect the microphone supplied with this product when using Android Auto.
This product
Fuse (10 A)
Power supply
Power cord
With a two-speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Grey
Front speaker
Grey/black
Right
Violet
Rear speaker
Violet/black
4 m
Microphone
Aerial jack
Wired remote input
Hard-wired remote control adapter can be connected (sold separately).
Violet/white
Of the two lead wires connected to the back lamp, connect the one in which the
voltage changes when the gear stick is in the REVERSE (R) position. This connection
enables the unit to sense whether the car is moving forwards or backwards.
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that equipment. If not, keep the Audio Mute lead free of any connections.
Light green
Used to detect the ON/OFF status of the handbrake. This lead must be connected to
the power supply side of the handbrake switch.
Blue/white
Power supply side
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Earth side
Chapter
27
Handbrake
switch
61
Engb