Using The Remote Control; Basic Operation; Checking Part Names And Functions; Remote Control - Pioneer AVH-X8790BT Owner's Manual

Dvd rds av receiver
Hide thumbs Also See for AVH-X8790BT:
Table of Contents

Advertisement

There is a danger of explosion if the
battery is incorrectly replaced. Replace
only with the same or equivalent type.
Do not handle the battery with metallic
tools.
Do not store the battery with metallic
objects.
If the battery leaks, wipe the remote
control completely clean and install a
new battery.
When disposing of used batteries, com-
ply with governmental regulations or
environmental public institutions' rules
that apply in your country/area.

■ Using the remote control

Point the remote control in the direction of
the front panel to operate.
The remote control may not function
properly in direct sunlight.
Important
Do not store the remote control in high
temperatures or direct sunlight.
Do not let the remote control fall onto
the floor, where it may become jammed
under the brake or accelerator pedal.

Basic operation

Checking part names and
functions
This chapter gives information about the
names of the parts and the main features
using the buttons.
1
2
3
4 5 6
7 8 9
a
1 LCD screen
2 Remote control sensor
3 VOL (+/–) button
Press to adjust the AV (Audio and Video)
source volume.
4 MUTE button
Press to mute. Press again to unmute.
5 HOME button
Press to display the Top menu screen.
For details of the operations, refer to How
to use the screens on page 10.
Press and hold to activate the voice
recognition function.
For details, refer to Using the voice
recognition function on page 17.
6 MODE button
Press to switch between the Application
screen and the AV operation screen.
p If the display cannot switch from the
AV operation screen to the Application
screen when the MODE button is
pressed, the display will turn off.
For details of the operations, refer to How
to use the screens on page 10.
Press and hold to turn the display off
when the Application screen is available.
For details, refer to Turning off the display
on page 9.
7 TRK button
Press to perform manual seek tuning, fast
forward, reverse and track search controls.
8
button
9 RESET button
For details of the operations, refer
to Resetting the microprocessor on
page 6.
a Auto EQ microphone input jack
Use to connect a microphone for acoustical
measurement.
b Disc-loading slot
Insert a disc to play.
For details, refer to Inserting and ejecting
b
a disc on page 8.
c SD card slot
c
For details, refer to Inserting and ejecting
an SD memory card on page 9.

Remote control

1
2
3
9
a
4
5
b
6
7
c
8
1 VOLUME (+/–)
2 REAR SRC
Press to cycle through all the available
rear sources.
Press and hold to turn the rear source
off.
3 SRC/OFF
Press to cycle through all the available
front sources.
Press and hold to turn the front source
off.
4 Source mode select switch
Use to switch the source mode between the
front source and the rear source.
5 Thumb pad
Use to select a menu on the DVD menu.
6 RETURN
Returns to the specified point and starts
playback from there.
7
Press to pause or resume playback.
For audio
Press and hold to perform fast reverse.
For video
Press to perform fast reverse.
Press to change the fast reverse speed.
For audio
Press and hold to perform fast forward.
For video
Press to perform fast forward.
Press to change the fast forward speed.
Press to return to the previous track
(chapter).
Press to go to the next track (chapter).
Press to stop playback.
If you resume playback, playback will start
from the point where you stopped. Touch the
key again to stop playback completely.
8 FOLDER/P.CH
Press to select the next or previous disc
or folder.
Press to recall radio station frequencies
assigned to preset channel keys.
9 MUTE
Press to mute. Press again to unmute.
a MENU
Press to display the DVD menu during DVD
playback.
TOP MENU
Press to return to the top menu during DVD
playback.
b AUDIO
Press to change the audio language during
DVD playback.
SUBTITLE
Press to change the subtitle language dur-
ing DVD playback.
ANGLE
Press to change the viewing angle during
DVD playback.
c BAND/ESC
Press to select the tuner band when
tuner is selected as a source.
Press to cancel the control mode of
functions.
Press to switch between media file types
when playing the following types of data:
— Disc
— External storage device (USB, SD)
Chapter
02
7
Engb

Advertisement

Table of Contents
loading

Table of Contents