Am Loop Antenna; Connecting The Power Cord - Pioneer SX-311R Operating Instructions Manual

CONNECTIONS
FM Antenna
——
AM LOOP ANTENNA
iHustration shows
SX -311R multi-
voltage model.
Ground
Speaker system A
L
Speaker
system B
Turntable CD player
Connecting the input/output cords
When another stereo component (purchased separately) is con-
nected note the following instructions.
® Connect the plugs properly.Faulty connections can cause
noise and also breakdowns and failures,
© The white terminal is for the left channel and the red terminal is
for the right channel.
Connecting the speaker cords
Cutter fe]
=
10 mm
Ay
G@) Push up.
Push down.
@ Insert.
Twist the strands.
4
Cassette deck Cassette deck
NOTE ABOUT SPEAKER CONNECTIONS
© Speaker systems used should have an impedance of between
82 and 169
¢ Be sure that connections are secure. Check to make sure that
wires do not protrude from their terminals.
¢ Do not allow the speaker cords to short-circuit, Damage may
result to your unit.
* Do not attempt to connect two sets of speakers to a single
side (A or B), When using two sets of speakers, connect one
set to side A and one to side B.
| CONNECTING THE POWER CORD
(For U.S. and Canadian models)
Household electrical outlets are provided with specific polari-
ty, a live side and a neutral (ground) side, This unit utilizes
such polarity in order to improve sound quality. As shown in
the illustration, be sure to insert the power plug so that its
blades match the width of slots in the outlet.
Household electrical outlets
Long slot is neutral <7 [ " J i
(ground) side.
insert the wide blade
into the ground side
slot.
<ARB1357>