Video Component - Pioneer AVH-X8790BT Owner's Manual

Rear view camera
(ND-BC6)
(sold separately)
To video output
RCA cable
(supplied with ND-BC6)
This product
Brown (BC IN) Power supply
Power cord
Violet/white
(REVERSE-GEAR SIGNAL
INPUT)
For more details about the wiring, refer to
Connecting the power cord on page 61.
Notes
This mode is available when the rear view
camera setting is set to "On".
For details, refer to Setting rear view
camera activation on page 44.
Connect this product to the rear view
camera only. Do not connect to any other
equipment.
Connecting the external video
component
■ Using AV input
This product
15 cm
23 cm
Yellow
(VIDEO INPUT)
Red, white
(AUDIO INPUT)
To audio outputs To video output
Note
This mode is available when the setting of AV
input is set to "On".
For details, refer to Setting AV input on
page 43.
■ Using an AUX input
This product
AUX input
Mini-jack AV cable
(CD-RM10)
(sold separately)
Red, white
Yellow
To video output To audio outputs
Notes
This mode is available when the setting
of AUX input is set to "On".
For details, refer to Starting procedure on
page 39.
When connecting an external video com-
ponent using a mini-jack AV cable, use a
separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-
RM10) (sold separately) for wiring. If you use
other cables, the wiring position might differ
resulting in disturbed images and sounds.
OK
L : Left audio (White)
R : Right audio (Red)
L L
V : Video (Yellow)
V G R R G V
G : Earth
Connecting an HDMI device
This product
Notes
For details concerning the operations of
HDMI device, refer to Chapter 15.
When you connect the High Speed
HDMI Cable, use the lock tie to fix it
®
securely.
For details, refer to Securing the High
Speed HDMI ® Cable on page 64.
Chapter
27
65
Engb