Voip Ip Address Assignments; Table 5-8 Voip Ip Address Assignments - NEC Univerge SV9100 Manual

Program/
Item No.
22-02-01
2.2
Program/
Item No.
84-26-01
84-26-02
84-26-03
5-22
Table 5-7 Digital Trunk Assignments (Continued)
Description/Selection
Incoming Call Trunk
Setup – Trunk Type

VoIP IP Address Assignments

For this feature, the GPZ-IPLE, daughter board is installed on the GCD-CP10
blade. The GPZ-IPLE daughter board reduces the maximum capacity of trunks in
the system.

Table 5-8 VoIP IP Address Assignments

Description/Selection
IPL Basic Setup – IP
Address
IPL Basic Setup – RTP
Port Number
IPL Basic Setup – RTCP
Port Number
(RTP Port Number + 1)
Assigned Data
001 ~ 400
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
Default is 0
Assigned Data
XXX.XXX.XXX.XXX
0~65534
0~65534
Issue 2.0
Comments
Set the feature type for
the trunk you are
programming.
Comments
Assign the VOIPDB Gateway IP
Address.
Slot 1 = 172.16.0.20
Default:
RTP Port = 10020
Default:
RTCP = 10021
SV9100 IP K-CCIS