NEC SV9100 User Manual

Dial Out

Lift handset (or press Speaker key)

Choose Line (if Applicable) OR Dial 9 (system will automatically choose one for you)
Speaker Phone Note: When using the Speaker Phone you must have your MIC
the caller to hear you, turn the MIC
Parking a Call for another Employee

With an active call, Press an unlit Park key (ex. Park 1), key will then flash on all phones

Call or Page Employee to Pick Up "Park 1"
To Retrieve: Lift handset, press the flashing Park key
N
OTE : Placing a call ON HOLD
retrieve it (must be placed on park for other employees to retrieve call)
Placing a Call on Hold

With an active call, Press the Hold
NOTE if Using Park: When placing a call on hold, another employee will NOT be able to retrieve the call. Hold is
exclusive for yourself. If you need an employee to take that call, you will need to transfer it to them.
To Pick Up the Held Call: Press the flashing Line/Call key

Transfer a Call


With an active call, Press Transfer key

Dial Extension Number or 9 + Phone Number, announce call (optional)

Hang up for call to be transferred
Transfer a Call Directly to Voicemail

With an active call, Press Transfer key

Press the VMsg key (on display), followed by the extension (creates no disruption for the employee)

Hang up
OR

With an active call, Press Transfer key

Dial the Extension Number, then press 8 (make a half ring at employees desk before Vmail picks up)

Hang up

Intercom Calls


Lift handset (or press Speaker

Dial Extension Number
Note: Press VMsg soft key (or press 8) after the extension to go directly to voicemail
Paging
(If Applicable)

Lift handset

Press pre-programmed Page key

After the double beep, Announce Call

Hang Up (Gently)
key off if you would like to Mute the Speaker Phone
(If Applicable)
will keep your call on your
key
key)
PERSONAL CALL KEY and NO ONE
Page 1 of 3
key lit
RED in order for
else will be able to
Service:
604 -856- 9155
Email:
service@natg.ca