Disk With Foreign Configuration - Hitachi Compute Blade 500 Series User Manual

Tip: Clicking No returns window to the main menu.
3 In response to the following message, power off the system unit or click
.
Power > Power Off from the remote console toolbar to restart the
system unit.
Tip: For details the remote console, see the Hitachi Compute Blade 500
Series Remote Console User's Guide contained in the USB memory
attached to the unit.

Disk with foreign configuration

This section describes how to deal with a disk with a different configuration
detected by the disk array controller board configuration.
Difference in configuration between disks may be caused by the following
conditions.
A disk failed and could not be recognized. Then the disk has been restored to be
recognized.
1 Click Preview.
.
Table 4-22 Conditions to generate foreign configuration
Conditions to generate foreign configuration
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
4-89