Programming - Operating Modes - Honeywell TheraPro HR90 Instruction Manual

Saving energy in ECO mode
In ECO mode, the room temperature in automatic mode
specified by the time program is lowered by 3 °C.
fTo activate ECO mode, press the button AUTO/
ECO/MANU until
The displayed temperature is reduced by 3 °C
ECO mode runs until you press the button AUTO/
ECO/MANU again and select a different operating
mode.
Manual mode
In manual mode, the radiator controller operates at
the (manually) set temperature until you change the
temperature or change to a different operating mode.
fTo activate the manual mode. press the button
AUTO/ECO/MANU until
The temperature can be adjusted manually using the
adjustment dial
.
Manual mode runs until you press the button AUTO/
ECO/MANU again and select a different operating
mode.
6. Programming – Operating modes
Overview of the operating modes
• "Party" operating mode: In this operating mode, you
can specify a temperature for a number of hours.
After the set period has expired, the radiator controller
changes back to automatic mode.
• "Day off" operating mode: If, for example, a public
holiday during the week, the automatic mode settings
may not meet your requirements on these days. In
such cases you can activate a different time program
for one or more days. After the set period has expired,
the radiator controller changes back to automatic
mode.
• "Holiday" operating mode: In this operating mode
you can specify a temperature for a specific number
of days. After the set period has expired, the radiator
controller changes back to automatic mode.
is displayed.
economy
is displayed.
manual
Selecting operating modes
Selecting the "Party" or "Holiday" operating
mode
1. Press the PROG button and turn the adjustment dial
to the left until
.
2. Confirm the selected operating mode with the
button.
Hours or Days flashes.
3. Use the adjustment dial to set the desired number of
hours or days and confirm with OK .
The temperature display flashes.
4. Use the adjustment dial to set the desired temperature
and confirm with OK .
The selected operating mode and the set temperature
are displayed.
Selecting the "Day off" operating mode
1. Press the PROG button and turn the adjustment dial
to the left until
2. Confirm the selected operating mode with the
button.
flashes.
days
3. Use the adjustment dial to set the desired number of
days and confirm with OK .
The selected operating mode is displayed.
i
• The procedure of creating the time program for
special days is described in Section 8.
• When you enter the number of days for holidays/
special day the current day counts as the first day.
• An overview of the program structure is shown on
the last page of these instructions.
7
or is displayed.
party holiday
is displayed.
day off
OK
OK