Yamaha RX-V1700 Owner's Manual page 83

Front speakers FRONT SP
Choices: SMALL, LARGE
FRONT SP
SMALL
• Select "SMALL" (small) if you have small front
speakers that do not reproduce low-frequency signals
effectively. The low-frequency signals of the front left
and right channels are directed to the speakers selected
in "LFE/BASS OUT" (see page 80).
• Select "LARGE" (large) if you have large front
speakers that reproduce low-frequency signals
effectively. All the front left and right channel signals
are directed to the front left and right speakers.
Notes
• When "LFE/BASS OUT" is set to "FRONT" (see page 80), the
LFE signals found in Dolby Digital or DTS sources, the low-
frequency signals of the front left and right channels, and the
low-frequency signals of other speakers set to "SML" (or
"SMALL") are all directed to the front left and right speakers
regardless of the "FRONT SP" setting.
• When "LFE/BASS OUT" is set to "FRONT" (see page 80), you
can select only "LARGE" in "FRONT SP". If the value of
"FRONT SP" is set to other than "LARGE" in advance, this
unit changes the value to "LARGE" automatically.
Center speaker CENTER SP
Choices: NONE, SML, LRG
CENTER SP
NONE
• Select "NONE" (none) if you did not connect a center
speaker. The center channel signals are directed to the
front left and right speakers.
• Select "SML" (small) if you have a small center
speaker that does not reproduce low-frequency signals
effectively. The low-frequency signals of the center
channel are directed to the speakers selected in
"LFE/BASS OUT".
• Select "LRG" (large) if you have a large center speaker
that reproduces low-frequency signals effectively. All
the center channel signals are directed to the center
speaker.
[
LARGE
[
SML LRG
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Surround left/right speakers SUR. L/R SP
Choices: NONE, SML, LRG
SUR. L/R SP
[
NONE
• Select "NONE" (none) if you did not connect surround
speakers. This unit is set to the Virtual CINEMA DSP
mode (see page 49) and "SB L/R SP" is automatically
set to "NONE".
• Select "SML" (small) if you have small surround left
and right speakers that do not reproduce low-frequency
signals effectively. The low-frequency signals of the
surround left and right channels are directed to the
speakers selected in "LFE/BASS OUT".
• Select "LRG" (large) if you have large surround left
and right speakers that reproduce low-frequency
signals effectively. All the surround channel signals are
directed to the surround left and right speakers.
SML LRG
81
En