Link Information - D-Link DWL-AG660 Manual

Using the Configuration Utility (continued)
After clicking on the Configuration Utility icon, the Link Info screen will dis-
play the settings for the DWL-AG660:
Status:
Displays the MAC address
of the access point or router
to which the DWL-AG660 is
associated.
SSID:
The Service Set Identifier is the
name assigned to the wireless
network. The factory SSID
setting is default.
Frequency:
802.11g indicates that the DWL-
AG660 is communicating in the
2.4GHz band.
Wireless Mode:
Either Infrastructure or Ad-Hoc will be displayed here. (Please see the Getting
Started section in this manual for an explanation of these two modes.)
Encryption:
You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.
Connection Info:
The connection status is displayed here.
Tx Rate:
Tx Rate settings are automatically determined for an optimal speed up to a
maximum of 54Mbps (108Mbps in Turbo mode).
Channel:
The channel selection is automatically determined by the DWL-AG660. (Only
channels 52 and above are available for selection.)
Signal Strength/Link Quality:
Displays the Link Quality for the DWL-AG660 wireless connection to the access
point. The signal strength represents the wireless signal between the access
point and the DWL-AG660. The percentage coincides with the graphical bar.
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Rescan Button:
Rescans for the strongest signal in your environment and associates with that
access point or router.
Link Info
14