Infrastructure Network - D-Link DWL-AG660 Manual

Getting Started (continued)
Setting up a Wireless
Infrastructure
Network
For a typical wireless
setup at home (as
shown here), please
do the following:
You will need broadband Internet access (a Cable or DSL-subscriber line
into your home or office).
Consult with your Cable or DSL provider for proper installation of the
modem.
Connect the Cable or DSL modem to your broadband router (see the
Quick Installation Guide included with your router).
If you are connecting a desktop computer to your network, you can install
the D-Link AirPremier
available PCI slot on your desktop computer. You may also install the
DWL-G510, DWL-G520 or other compatible D-Link Wireless PCI
Adapter.
Install the D-Link DWL-AG660 Wireless Cardbus Adapter into a laptop
computer.
(See the Quick Installation Guide included with the DWL-AG660).
If you wish, you may connect a computer that is equipped with an Ethernet
network adapter (such as a DFE-530TX+) to the router also.
A RADIUS server is optional. Connect a RADIUS server to your network
to use all the features of WPA. (Without a RADIUS server you can still
use the WPA Pre-Shared Key mode.) RADIUS Authentication can also
be provided by another service provider over the Internet and remote to
your network site.
7
6
AG DWL-AG530 Wireless PCI Adapter into an
™
2
3
DI-784
11
1
4
530
DWL-AG
5
660
DWL-AG
with Laptop PC