D-Link DWL-AG650 Quick Installation Manual
D-Link DWL-AG650 Quick Installation Manual

D-Link DWL-AG650 Quick Installation Manual

Tri-mode dualband wireless cardbus adapter
Hide thumbs Also See for DWL-AG650:

Advertisement

Quick Links

This product works with the following operating
Windows XP, Windows
system software:
2000, Windows Me, Windows 98se

Before You Begin

You must have at least the following:
A laptop/notebook computer with an available 32-bit Cardbus slot
At least a 500 MHz processor and 128MB of memory
Cardbus Controller properly installed and working in the laptop computer
An 802.11a, 802.11b or 802.11g Access Point (for Infrastructure Mode) or
another 802.11a, 802.11b, or 802.11g wireless adapter (for Ad-Hoc; Peer-to-
Peer networking mode.)
Check Your Package Contents
These are the items included with your DWL-AG650 purchase:
If any of the above items are missing, please contact your reseller.
Insert the D-Link CD Into Your Laptop PC
Turn on the computer
Insert
the
CD-ROM drive.
The step-by-step instructions that follow are shown
in Windows XP. The steps and screens are similar
for other Windows operating systems
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DWL-AG650 AirXpert Tri-Mode Dualband Wireless

Cardbus Adapter

CD-ROM (containing Drivers, Manual and Warranty)
and
DWL-AG650 Driver CD in the
specifications subject to change without notice. DWL-AG650 03262003
DWL-AG650
AirXpert Tri-Mode Dualband
Cardbus Adapter into
your computer before
installing the driver
software from the
D-Link CD!
1
TM
Wireless Cardbus Adapter
Do
NOT
install
the DWL-AG650
Part No. IG-BDWLAG650

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DWL-AG650

  • Page 1: Before You Begin

    Windows XP. The steps and screens are similar for other Windows operating systems ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-AG650 03262003...
  • Page 2 Continued... The Install Screen will appear. Click Install Driver If the CD Autorun function does not automatically start on your computer , go to Start > Run and type “D:\Setup.exe.” If it does start, proceed to the next screen. Type “D:\Setup.exe.”...
  • Page 3: Your Computer

    Click Next Click Next Click Finish Shut down your computer...
  • Page 4 Cardbus Adapter in Your Computer Make sure to turn off the laptop computer. Locate the Cardbus slot on your laptop computer. Gently insert the DWL-AG650 into the Cardbus slot in your laptop computer (as shown.) Link/Activity LED Indicates that the DWL-AG650...
  • Page 5: Restart Your Computer

    For Windows XP: This Installation alert screen may appear after the desktop computer restarts. Click Continue Anyway to finalize the installation The D-Link driver software for this device is undergoing Windows Logo testing. Microsoft certification is pending. Click Finish to finalize the installation.
  • Page 6 Your Installation is Complete! After you’ve continued in Windows XP, 2000, ME, or 98SE, the D-Link AirXpert DWL-AG650 Configuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this...
  • Page 7 Appendix For Windows XP, if you wish to use the AirXpert utility, please do the following steps. Click the XP Networking icon to use the Zero Configuration Wireless Settings. Click Advanced Click Wireless Networks Uncheck “Use Windows to configure my wireless net- work settings.”...
  • Page 8: Using The Configuration Utility

    Displays the current encryption status of the wireless connection. Link Quality / Signal Strength: Displays the Link Quality for the DWL-AG650 wireless connection to the access point. The Signal Strength represents the wireless signal between the access point and the DWL- G650.
  • Page 9 SSID: The Service Set Identifier is the name as- signed to the wireless network. The factory SSID setting is set to default. Make changes here to match the SSID on existing Wireless Router or Access Point. Channel: By default, the channel is set to 6.
  • Page 10: Ip Address Configuration

    Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Right Click and Select Properties on the Network Connection associated with the DWL-AG650. Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup...
  • Page 11: For Windows 2000 Users

    For Windows 2000 users: Go to Start > Settings > Dial-up Connections > Right Click and Select Properties on the Connection associated with the DWL- AG650 > select Properties Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server the local network.
  • Page 12: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.

This manual is also suitable for:

Airxpert dwl-ag650

Table of Contents