Download
Share
Print this page
D-Link AirPremier DWL-AG660 Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Adapter
  5. AirPremier AG DWL-AG660
  6. Quick installation manual
D-Link AirPremier DWL-AG660 Quick Installation Manual

D-Link AirPremier DWL-AG660 Quick Installation Manual

Ag dualband wireless cardbus adapter
Hide thumbs Also See for AirPremier DWL-AG660:

Advertisement

Quick Links

Download this manual See also: Manual, Quick Installation Manual
This product works with the
following operating system
software:
Windows XP,
Windows 2000
Before You Begin
You must have at least the following:
•
A laptop/notebook computer with an available 32-bit cardbus slot
•
At least a 500MHz processor and 128MB of memory
•
Cardbus controller properly installed and working in the laptop computer
•
An 802.11a, 802.11b or 802.11g access point (for Infrastructure Mode) or
another 802.11a, 802.11b, or 802.11g wireless adapter (for Ad-Hoc; Peer-to-Peer
networking mode.)
Check Your Package Contents
These are the items included with your DWL-AG660 purchase:
If any of the above items are missing, please contact your reseller.
Insert the D-Link CD Into Your Laptop PC
Turn on the computer
DWL-AG660 Driver CD in the CD-ROM
drive.
The step-by-step instructions that follow
are shown in Windows XP. The steps
and screens are similar for other Windows
operating systems.
©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifi-
DWL-AG660 AirPremier
Cardbus Adapter
CD-ROM (containing Drivers, Manual and Warranty)
and
Insert
cations subject to change without notice. DWL-AG660 11132003
DWL-AG660
AirPremier
Wireless Cardbus Adapter
AG Dualband Wireless
TM
the
1
AG Dualband
TM
D o
N O T
the DWL-AG660
Cardbus Adapter into
your computer before
i n s t a l l i n g t h e d r i v e r
software from the D-Link
CD!
i n s t a l l

Advertisement

loading

Related Manuals for D-Link AirPremier DWL-AG660

Summary of Contents for D-Link AirPremier DWL-AG660

  • Page 1 D-Link and screens are similar for other Windows operating systems. ©2005 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifi- cations subject to change without notice. DWL-AG660 11132003...
  • Page 2 Continued... The Install Screen will appear. Click Install Driver If the CD Autorun function does not automatically start on your computer , go to Start > Run and type “D:\driver\ setup.exe.” If it does start, proceed to the next screen. Type “D:\driver\setup.exe.”...
  • Page 3 Continued... Click Next Click Next Click Finish Shut down your computer...
  • Page 4 Installing the DWL-AG660 Wireless Cardbus Adapter in Your Computer Make sure to turn off the laptop computer. Locate the Cardbus slot on your laptop computer. Gently insert the DWL-AG660 into the Cardbus slot in your laptop computer (as shown.) 32-bit connector This is the connector that fits Link/Activity LED into the Cardbus slot of your...

  • Page 5: Restart Your Computer

    Hardware Installation alert screen may appear after the desktop computer restarts. Click Continue Anyway to finalize the installation The D-Link driver software for this device is undergoing Windows Logo testing. Microsoft certification is pending. Click Finish to finalize the installation.
  • Page 6 Click to finalize the installation. The D-Link driver software for this device is undergoing Windows Logo testing. Microsoft certification is pending. Your Installation is Complete! After you have finished the installation in Windows XP, 2000, Me, or 98SE, the D-Link AirPremier DWL-AG660 Configuration Utility will...
  • Page 7 Appendix For Windows XP, if you wish to use the AirPremier utility, please do the following steps. Click the XP Networking icon to use the Zero Configuration Wireless Settings. Click Advanced Click Wireless Networks Uncheck “Use Windows to configure my wireless network settings.”...

  • Page 8: Using The Configuration Utility

    Appendix (Continued) Using the Configuration Utility Status: Displays Wireless Mode: SSID The Service Frequency: the MAC address The factory setting is Set Identifier is the Displays the set to Infrastructure. of the access point name assigned to the current frequency Ad-Hoc mode is used that is associated wireless network.
  • Page 9 Wireless Mode: Authentication: SSID: The Service Set The factory setting is You can specify the Identifier is the name assigned set to Infrastructure. authentication mode to the wireless network. The Ad-Hoc mode is used for the wireless factory SSID setting is set to for Peer-to-Peer network.

  • Page 10: Ip Address Configuration

    IP Address Configuration To connect to a network, make sure the proper network settings are configured for DWL-AG660. Microsoft Windows XP: Go to Start > Right-click on My Network Places > select Properties > Right-click and select Properties on the Network Connection associated with the DWL-AG660.
  • Page 11 For Windows 2000 users: Go to Start > Settings > Network and Dial-up Connections > Right Click and select Properties on the Local Area Connection associated with the DWL- AG660 Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server is available on...

  • Page 12: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link websites. D-Link provides free technical support for customers within Canada, the United Kingdom, and Ireland. Customers can contact D-Link technical support through our websites, or by phone.