System Information Formats - HP 5500 EI Series Configuration Manual

Table 3 Default output rules for different output destinations
Destination
Console
Monitor
terminal
Log host
Trap buffer
Log buffer
SNMP
module
Web
interface

System information formats

The following shows the original format of system information, which might be different from what you see.
The actual format depends on the log resolution tool you use.
Formats
The system information format varies with output destinations, as shown in
Table 4 System information formats
Output destination
Console, monitor
terminal, logbuffer,
trapbuffer, or SNMP
module
Log
Source
modules
State
All
supported
Enabled
modules
All
supported Enabled
modules
All
supported Enabled
modules
All
supported Disabled
modules
All
supported Enabled
modules
All
supported Disabled
modules
All
supported Enabled
modules
Format
timestamp sysname
module/level/digest: content
Trap
Severity State
Informational Enabled
Informational Enabled
Informational Enabled
Informational Enabled
Informational Disabled
Debug Enabled
Debug Enabled
Example
%Jun 26 17:08:35:809 2011 Sysname
SHELL/4/LOGIN: VTY login from 1.1.1.1
39
Debug
Severity State
Debug Enabled
Debug Enabled
Debug Disabled
Informational Disabled
Debug Disabled
Informational Disabled
Debug Disabled
Table 4.
Severity
Debug
Debug
Debug
Debug
Debug
Debug
Debug