Configuring The Collaboration Function; Configuring Threshold Monitoring; Configuration Prerequisites; Configuration Guidelines - HP 5500 EI Series Configuration Manual

Configuring the collaboration function

Collaboration is implemented by establishing reaction entries to monitor the detection results of a test
group. If the number of consecutive probe failures reaches the threshold, the configured action is
triggered.
To configure the collaboration function:
Step
1. Enter system view.
2. Enter NQA test group view.
3. Enter test type view of the test
group.
4. Configure a reaction entry.
5. Exit to system view.
6. Configure a track entry and
associate it with the reaction
entry of the NQA test group.

Configuring threshold monitoring

Configuration prerequisites

Before you configure threshold monitoring, complete the following tasks:
Configure the destination address of the trap message by using the snmp-agent target-host
•
command. For more information about the snmp-agent target-host command, see Network
Management and Monitoring Command Reference.
• Create an NQA test group and configure the related parameters.

Configuration guidelines

Follow these guidelines when you configure threshold monitoring:
NQA DNS tests do not support the action of sending trap messages. The action to be triggered in
•
DNS tests can only be the default one, none.
Only the test-complete keyword is supported for the reaction trap command in a voice test.
•
Command
system-view
nqa entry admin-name
operation-tag
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo }
reaction item-number
checked-element probe-fail
threshold-type consecutive
consecutive-occurrences
action-type trigger-only
quit
track entry-number nqa entry
admin-name operation-tag
reaction item-number
130
Remarks
N/A
N/A
The collaboration function is not
supported in UDP jitter and voice
tests.
Not created by default.
You cannot modify the content of
an existing reaction entry.
N/A
Not created by default.