System Config - Panasonic BT-LH2600W Operating Instructions Manual

Main Menu
(continued)

SYSTEM CONFIG

Sub menu Settings
CONT./BACK.
<CONTRAST>
<BACKLIGHT>
BACKLIGHT
< 0-60 >
SUB WINDOW
<FULL>
<PART>
WFM POSITION
<LB>
<RB>
<RT>
<LT>
MENU
<CENTER>
POSITION
<LB>
<RB>
<RT>
<LT>
ROTARY
<CENTER>
POSITION
<LB>
<RB>
<RT>
<LT>
STATUS DISPLAY
<CONTINUE>
<3SEC OFF>
<OFF>
SETUP LOAD
<FACTORY>
<USER1>
<USER2>
<USER3>
<USER4>
<USER5>
SETUP SAVE
<USER1>
<USER2>
<USER3>
<USER4>
<USER5>
FAN MOTOR
<OFF>
<ON>
COLOR SPACE
<EBU>
<SMPTE-C>
*1 When the monitor is shipped from the factory, "USER1" – "USER5" and "FACTORY" all have the same details.
*2 Factory preset settings are The U.S.A. and Canada: SMPTE-C, Others: EBU.
Explanation
Used to select the function to be assigned to [CONTRAST/
BACKLIGHT] (a knob on the front panel).
<CONTRAST>
Used to adjust CONTRAST.
<BACKLIGHT>
Used to adjust BACKLIGHT.
Used to adjust the LCD backlight level.
Used to select the type of sub window.
<FULL>
Used to reduce the whole input signal screen, and arrange it
horizontally when it is displayed.
<PART>
Used to cut out the central section of the input signal screen, and
arrange it horizontally when it is displayed (Displayed at the same size
as the previous screen).
Used to set the WFM display position.
<LB> Bottom left of the screen
<RT> Top right of the screen
Used to set the on screen menu display position.
<CENTER> Center of the screen
<LB> Bottom left of the screen
<RT> Top right of the screen
Used to set the picture adjusting knob status (on screen menu) display
position.
<CENTER> Center of the screen
<LB> Bottom left of the screen
<RT> Top right of the screen
Used to set the input signal status (on screen menu) display status.
<CONTINUE> Displayed normally.
<3SEC OFF> After changing status, it is displayed for approximately
<OFF>
The saved factory preset setting values (FACTORY) or the user data
*1
(USER 1–USER 5) are loaded. Also after loading user data, the screen
*1
displays the signal selected before loading data.
*1
*1
*1
Up to 5 sets of user data can be saved (
The menu settings and picture adjusting knob adjustment values
(PHASE /CHROMA /BRIGHT /CONTRAST) excluding "SETUP SAVE/
SETUP LOAD" are saved.
Used to set fan operation.
<OFF>
<ON>
*2
Used to set studio-specified colors.
*2
The underlined values are factory preset setting values.
<RB> Bottom right of the screen
<LT> Top left of the screen
<RB> Bottom right of the screen
<LT> Top left of the screen
<RB> Bottom right of the screen
<LT> Top left of the screen
3 seconds, and then disappears.
Not displayed.
The fan is stopped. The brightness of the backlight
automatically lowers.
The fan operates. The backlight brightness returns to
normal.
page 15).
21