Makita 4112H Instruction Manual page 5

6. Use only flanges specified for this tool.
7. Be careful not to damage the spindle or
the flange (especially the installing sur-
face). Damage to these parts could result
in wheel breakage.
8. NEVER use tool with wood cutting blades
or other sawblades. Such blades when
used on a grinder frequently kick and
cause loss of control leading to personal
injury.
9. Hold the tool firmly.
10. Keep hands away from rotating parts.
11. Make sure cord is clear of wheel. Do not
wrap cord around your arm or wrist. If
control of tool is lost, cord may become
wrapped around you and cause personal
injury.
12. Make sure the wheel is not contacting the
workpiece before the switch is turned on.
13. Before using the tool on an actual work-
piece, let it run for a while. Watch for
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this
instruction manual may cause serious personal injury.
vibration or wobbling that could indicate
poor installation or a poorly balanced
wheel.
14. Watch out for flying sparks. Hold the tool
so that sparks fly away from you and
other persons or flammable materials.
15. Do not leave the tool running. Operate the
tool only when hand-held.
16. Do not touch the workpiece immediately
after operation; it may be extremely hot
and could burn your skin.
17. ALWAYS wear proper apparel including
long sleeve shirts, leather gloves and
shop aprons to protect skin from contact
with hot cuttings.
18. Use of this tool to cut some products
could expose user to dust containing haz-
ardous substances. Use appropriate res-
piratory protection.
19. The tool must be used only for dry cut-
ting. DO NOT use water.
5