Page 1
INSTRUCTION MANUAL Angle Cutter 4112HS 4112S 4114S 007130 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Uncertainty (K) : 1.5 m/s electronic equipment implementation in accordance with national law, electric equipment that For Model 4112HS have reached the end of their life must ENG102-3 Noise be collected separately and returned to The typical A-weighted noise level determined according...
Makita Corporation responsible Electrical safety manufacturer declare that the following Makita Power tool plugs must match the outlet. Never machine(s): modify the plug in any way. Do not use any Designation of Machine: adapter plugs with earthed (grounded) power Angle Cutter tools.
Page 4
13. Prevent unintentional starting. Ensure the and the work to be performed. Use of the power switch is in the off-position before connecting tool for operations different from those intended to power source and/or battery pack, picking could result in a hazardous situation. up or carrying the tool.
Page 5
accessory is dropped, inspect for damage or Kickback and Related Warnings install undamaged accessory. After Kickback is a sudden reaction to a pinched or snagged inspecting installing accessory, rotating wheel, backing pad, brush or any other position yourself and bystanders away from accessory.
Page 6
c) Wheels must be used only for recommended Additional Safety Warnings: applications. For example: do not grind with 17. When using depressed centre grinding wheels, the side of cut-off wheel. Abrasive cut-off wheels be sure to use only fiberglass-reinforced are intended for peripheral grinding, side forces wheels.
36. When use cut-off wheel, always work with the The wheel guard can be adjusted about 80 degrees, dust collecting wheel guard required by after you loosen the clamping nut. Adjust to the desired domestic regulation. angle, then secure the clamping nut. 37.
To CAUTION: do this, tightly secure the bench grinder wheel or Use only the Makita wrench to install or remove the • concrete block and cut in it. wheel.
Page 9
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Diamond wheels (Dry type) • Abrasive cut-off wheels • Socket wrench 17 •...
Page 12
Makita Corporation Anjo, Aichi, Japan 884494C221...