Yamaha YZ450F Owner's Service Manual page 77

1. Throttle cable
2. Clutch cable
3. Plastic band
4. Engine stop switch lead
5. Launch control switch lead
6. Front brake hose
7. Brake hose guide
8. Number plate
A. Number plate band
B. Pass the clutch cable to the rear of the number
plate band.
C. Clamp the engine stop switch lead and the
launch control switch lead to the handlebar by the
plastic band. Do not cut the end of the plastic
band.
D. Pass the engine stop switch lead and the launch
control switch lead between the head pipe and
the cable guide.
E. Pass the front brake hose to the front of the num-
ber plate.
F. 40°±10°
G. Vertical direction
H. Pass the clutch cable to the guide in the number
plate.
CABLE ROUTING DIAGRAM
2-36