b
1
7. Install:
• Collar "1"
• Rubber cover "2"
• Throttle grip "3"
TIP
Apply the lithium-soap-based grease on the
throttle grip sliding surface.
8. Install:
• Throttle cables "1"
TIP
Slightly coat the end of throttle cable and inside
of throttle grip with lithium-soap-based grease.
Then, mount the throttle grip onto the handle-
bar.
64
64
c
3
4-36
9. Install:
• Throttle cable housings "1"
• Screw (throttle cable housings) "2"
Screw (throttle cable housings)
3.8 Nm (0.38 m·kgf, 2.8 ft·lbf)
EWA1DX5001
WARNING
After tightening the throttle cable housing
screws, check that the throttle grip "3"
moves smoothly. If it does not, retighten the
screws for adjustment.
HANDLEBAR