CHECKING THE CLUTCH HOUSING
EASB111236
1. Check:
• Clutch housing dogs "a"
Damage/pitting/wear Deburr the clutch
housing dogs or replace the clutch housing.
TIP
Pitting on the clutch housing dogs will cause er-
ratic clutch operation.
CHECKING THE CLUTCH BOSS
EASB111237
1. Check:
• Clutch boss splines
Damage/pitting/wear Replace the clutch
boss.
TIP
Pitting on the clutch boss splines will cause er-
ratic clutch operation.
CHECKING THE PRESSURE PLATE
EASB111238
1. Check:
• Pressure plate
Crack/damage Replace.
EASB111239
CHECKING THE PUSH LEVER SHAFT
1. Check:
CHECKING THE CLUTCH PUSH RODS
EASB111240
1. Check:
a
2. Measure:
CHECKING THE PRIMARY DRIVE GEAR
EASB111241
1. Check:
5-42
• Push lever shaft
Wear/damage Replace.
• Push rod 1 "1"
• Bearing "2"
• Washer "3"
• Push rod 2 "4"
• Ball "5"
Cracks/damage/wear Replace.
• Push rod 2 bending limit
Out of specification Replace.
Push rod bending limit
0.10 mm (0.0039 in)
• Primary drive gear
Damage/wear Replace the primary drive
and primary driven gears as a set.
Excessive noise during operation Re-
place the primary drive and primary driven
gears as a set.
CLUTCH