Honda BE-LS22TL6505GO Operation Manual page 20

REF # DESCRIPTION
4 Road-Speed Tire and Wheel
5 Hardware Kit #2 (not shown) Including:
5-1 Castle nut / 1-14
5-2 Split Pin / Ø4 x 35
5-3 Hub cap
STEP 3: Attach the tongue and jack stand assembly to the reservoir
assembly.
1. Remove the spring clip (Ø3) and clevis pin (Ø6 x 50) from the jack
stand on the tongue, and then pivot the jack stand towards the
ground into the operating position. Secure the jack stand in position
with the clevis pin and spring clip just removed.
2. Attach the horizontal beam lock to the tongue, and then attach the
tongue to the reservoir assembly.
20
ASSEMBLY
QTY
2
1
2
2
2