Table of Contents
Advertisement
1B
Connect the Modem with USB
A
Connect one end of the
provided phone cable to the
ADSL (RJ-11 phone) port that is
on the back of the Modem.
NOTE: To use a USB connection, your
PC must use Windows 98, 98SE, Me,
2000, or XP. The USB port is not
supported on other operating systems.
B
Connect the other end of the
phone cable to the wall jack
with ADSL service.
C
Connect the power adapter to
the Modem (C) and to the
electrical outlet.
D
Connect one end of the USB to
the USB port on the back of the
ADSL Modem and the other
end to the USB port on your PC.
E
Turn on the Modem.
NOTE: A small device called a microfilter
(not included) may be necessary between
each phone and wall jack to prevent
interference. Contact your ISP if you have
any questions.
Important: Make sure to only place the
microfilters between the phone and the
wall jack and not between the Modem and
the wall jack or your ADSL will not connect.
Proceed to Step 2: Installing the USB
4
Driver
A
C
D
Advertisement
Table of Contents
