Table of Contents
Advertisement
Connect the other end of the
cable to the Ethernet port on
the back of the Modem. (C2)
D
Connect the power adapter to
the Modem (D1) and to the
electrical outlet (D2). Turn on
the Modem.
E
Turn on your PC.
NOTE: A small device called a microfilter
(not included) may be necessary between
each phone and wall jack to prevent
interference. Contact your ISP if you have
any questions.
Important: Make sure to only place
the microfilters between the phone
and the wall jack and not between the
Modem and the wall jack or your ADSL
will not connect.
The installation of the Modem with
an Ethernet Connection is
complete. If your service provider
requires you to configure your
Modem, refer to the User Guide
(English Only) on the
CD-ROM.
C2
D1
D2
3
Advertisement
Table of Contents
