Makita LS0714 Instruction Manual page 15

1
2
3
1. Dust bag
2. Dust nozzle
3. Fastener
3
1. Dust box
2. Cover
3. Button
2
3
1. Cylinder part
2. Dust box
3. Sawdust
2
1. Cylinder part
2. Dust box
Dust bag (accessory)
003937
The use of the dust bag makes cutting operations clean and dust collection
easy. To attach the dust bag, fit it onto the dust nozzle.
When the dust bag is about half full, remove the dust bag from the tool and pull
the fastener out. Empty the dust bag of its contents, tapping it lightly so as to
remove particles adhering to the insides which might hamper further collec-
tion.
NOTE:
If you connect a Makita vacuum cleaner to your saw, more efficient and
cleaner operations can be performed.
Dust box (accessory)
006793
1
Insert the dust box into the dust nozzle.
Empty the dust box at the earliest possible.
To empty the dust box, open the cover by pushing the button and throw away
sawdust. Return the cover to the original position and it locks. Dust box can
easily be removed by pulling out while turning it near the dust nozzle on the
tool.
2
NOTE:
If you connect a Makita vacuum cleaner to this tool, more efficient and cleaner
operations can be performed.
006792
CAUTION:
1
• Empty the dust box before collected sawdust level reaches the cylinder
part.
006794
1
15