Change The Modem Router's Device Name; Manage The Built-In Dhcp Server - NETGEAR C6250 User Manual

Change the Modem Router's Device Name

The modem router's default device name is C6250-100NAS. This device name displays in a
file manager when you browse your network.
To change the modem router's device name:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home page displays.
5. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
6. In the Device Name field, enter a new name.
7. Click the Apply button.
Your settings are saved.

Manage the Built-In DHCP Server

By default, the modem router functions as a DHCP server. The modem router assigns IP,
DNS server, and default gateway addresses to all devices connected to the LAN. The
assigned default gateway address is the LAN address of the modem router.
You can use another device on your network as the DHCP server or specify the network
settings of all your computers.
Note: If you disable the DHCP server and no other DHCP server is available
on your network, you must set your computer IP addresses manually
so that they can access the modem router.
To disable the built-in DHCP server:

1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www.routerlogin.net.
A login window opens.
AC1600 WiFi Cable Modem Router
Manage the WAN and LAN Network Settings
90