D-Link Dcs-6111 User Manual - D-Link DCS-6111 User Manual

Section 3 - Configuration
To enable motion detection, follow the steps below:
1. Click New to add a new motion detection window.
2. Enter a name in the Window Name field.
3. Define the sensitivity to moving objects and the space ratio of all alerted pixels by moving the Sensitivity and Percentage
slide bar.
4. Click Save to apply the changes.
5. Select Enable motion detection to activate motion detection.
Note: Drag to resize the window and click X to close the window.
The Percentage Indicator will rise or fall depending on the image variation. When motions are detected by the Network Camera
and are judged to exceed the defined threshold, a red bar rises. Meanwhile, the motion detection window will be outlined in red.
Utilizing this device as a trigger source, photos or videos can be captured instantly and sent to the remote server (Email, FTP).
A green bar indicates that even though motions are detected, the event will not be triggered because the image variations
are still falling under the defined threshold.

D-Link DCS-6111 User Manual

Percentage = 30%
54