Wpa-Psk/Wpa2-Psk - ZyXEL Communications NBG6815 User Manual

The following table describes the labels in this screen.
Table 26 Expert Mode > Wireless > Security Mode: No Security
LABEL
Security Mode
Apply
Cancel

11.3.2 WPA-PSK/WPA2-PSK

Select WPA-PSK or WPA2-PSK from the Security Mode list.
Note: WPA-PSK is not available if you enable WPS before you configure WPA-PSK in the
Expert
Figure 57 Expert Mode > Wireless > Security Mode: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 27 Expert Mode > Wireless > Security Mode: WPA-PSK/WPA2-PSK
LABEL
Security Mode
WPA-PSK
Compatible
Pre-Shared Key
Chapter 11 Wireless LAN
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the NBG6815.
Click Cancel to reload the previous configuration for this screen.
> Wireless > Wireless screen.
Mode
DESCRIPTION
Select WPA-PSK or WPA2-PSK to enable data encryption.
This field appears when you choose WPA2-PSK as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security mode to connect to
your NBG6815.
WPA-PSK/WPA2-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
NBG6815 User's Guide
90