Table of Contents
Advertisement
The following table describes the labels shown in the Status screen.
Table 16 Expert Mode: Status > System Status: Access Point Mode
LABEL
Device Information
Host Name
Model Number
Firmware Version
Sys OP Mode
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP
IPv6 Address
WLAN 2.4G Information
WLAN OP Mode
MAC Address
SSID
Channel
Security
WLAN 5G Information
WLAN OP Mode
MAC Address
SSID
Channel
Security
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
Interface Status
Interface
Status
Chapter 7 Access Point Mode
DESCRIPTION
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
This is the model name of your device.
This is the firmware version and the date created.
This is the device mode
(Section 4.1.2 on page
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Client or None.
This shows the IPv6 address of the NBG6815 on the LAN.
This is the device mode
(Section 4.1.2 on page
set - Access Point Mode.
This shows the 2.4GHz wireless adapter MAC Address of your device.
This shows a descriptive name used to identify the NBG6815 in the 2.4GHz wireless LAN.
This shows the channel number which you select manually.
This shows the level of wireless security the NBG6815 is using.
This is the device mode
(Section 4.1.2 on page
set - Access Point Mode.
This shows the 5GHz wireless adapter MAC Address of your device.
This shows a descriptive name used to identify the NBG6815 in the 5GHz wireless LAN.
This shows the channel number which you select manually.
This shows the level of wireless security the NBG6815 is using.
This column shows the type of data the NBG6815 is recording.
This column shows the actual data recorded by the NBG6815.
This is the total time the NBG6815 has been on.
This field displays your NBG6815's present date and time.
This displays what percentage of the NBG6815's processing ability is currently used. When
this percentage is close to 100%, the NBG6815 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
This shows what percentage of the heap memory the NBG6815 is using.
This displays the NBG6815 port types. The port types are: LAN and WLAN.
For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
NBG6815 User's Guide
26) to which the NBG6815 is set - AP Mode.
26) to which the NBG6815's wireless LAN is
26) to which the NBG6815's wireless LAN is
44
Advertisement
Table of Contents
